When and how often to change your furnace filter | Dayton Ohio weather

Knowing when to change the filter to your heating and air system in your home is important. We have many customers ask us when should they change the air filter, and our answer is, “it depends.”

Several factors determine when your filters need to be changed, but the main rule of thumb is if it looks dirty, change it! You shouldn’t wait until the filter is completely filthy though, because that means your heating and cooling system is not running at its full potential.


If you’re thinking that you only have to change your filter once a year, you may be shortening the life of your furnace. You should check your filter monthly and change if it is dirty. To determine if it’s too dirty, remove the filter and hold it up to the light. If you can no longer clearly see light, change the filter.

Many costly repairs can be avoided with regular filter changing. If you don’t change the filter, lack of airflow through the furnace could cause it to overheat and shut down. Similarly, a dirty filter can cause an air conditioner to shut down because the coils freeze up when airflow is inadequate. Both events stress the system.

Do you or anyone else in the home have allergies? Another main factor in how often you should change the filter is the occupants in the home.

If you have anyone who suffers from allergies, you should be changing the filters more often than recommended. This will help remove more of the allergens from the air in your home. If the filter is full and dirty, it won’t be able to trap them.


Filters are designed to protect the blower motor from dirt and remove particals from the aire. When buying filters for this task, buy a filter based on your needs. There are inexpensive glass fiber filters that will do the job, but if you want to reduce airborne dust in your home, you could start with the best of the inexpensive 1-in. disposable filters. A standard pleated filter costs a bit more than a fiber glass filter or better yet, to remove even more small particles, install an inexpensive, electrostatically charged fiber filter. Make sure to check the filter monthly and change it when it’s dirty (not just every three months as recommended).

Finally, whatever filter you use, make sure you reinstall it correctly, with the arrow on the filter edge pointing toward the blower motor. Putting it in backward decreases the filter’s efficiency. Need more help? Give Cowboys Heating and Air a call and we will send someone out to check your filter, replace it for you and show you what to look for in order to keep your furnace running in top condition!

Furnace Repair and Maintenance Dayton Ohio

Cowboys Heating & Air Maintenance Checklist

At Cowboys, we will maintain your equipment to prevent future problems and unwanted costs. We can keep your cooling and heating system at peak performance by having us do annual pre-season check-ups. We can get pretty busy depending on the season, so it’s best to check the cooling system in the spring and the heating system in the fall. To remember, you might plan the check-ups around the time changes in the spring and fall.

A typical maintenance check-up may include the following.

  • Check thermostat settings to ensure the cooling and heating system keeps you comfortable when you are home and saves energy while you are away.
  • Tighten all electrical connections and measure voltage and current on motors. Faulty electrical connections can cause unsafe operation of your system and reduce the life of major components.
  • Lubricate all moving parts. Parts that lack lubrication cause friction in motors and increases the amount of electricity you use.
  • Check and inspect the condensate drain in your central air conditioner, furnace and/or heat pump (when in cooling mode). A plugged drain can cause water damage in the house and affect indoor humidity levels.
  • Check controls of the system to ensure proper and safe operation. Check the starting cycle of the equipment to assure the system starts, operates, and shuts off properly.

Cooling Specific

  • Clean evaporator and condenser air conditioning coils. Dirty coils reduce the system’s ability to cool your home and cause the system to run longer, increasing energy costs and reducing the life of the equipment.
  • Check your central air conditioner’s refrigerant level and adjust if necessary. Too much or too little refrigerant will make your system less efficient increasing energy costs and reducing the life of the equipment.
  • Clean and adjust blower components to provide proper system airflow for greater comfort levels. Airflow problems can reduce your system’s efficiency by up to 15 percent.

Heating Specific

  • Check all gas (or oil) connections, gas pressure, burner combustion and heat exchanger. Improperly operating gas (or oil) connections are a fire hazard and can contribute to health problems. A dirty burner or cracked heat exchanger causes improper burner operation. Either can cause the equipment to operate less safely and efficiently.

Actions To Do Yourself

  • Inspect, clean, or change air filters once a month in your central air conditioner, furnace, and/or heat pump. Your contractor can show you how to do this. A dirty filter can increase energy costs and damage your equipment, leading to early failure.

Contact Cowboys Heating and Air today to schedule your maintenance before you are left out in the cold!

Geothermal System Helps Kentucky Family De-Stress Moving to a New Home, Saves Big on Utility Bills

Aug. 10, 2015 – They say that moving is one of the most stressful things in a person’s life. But thanks to geothermal technology, moving to a new home has been made less stressful for one family.

In a recent article in the Lexington (Ky.) Herald-Leader, Jamie and Haley Clark wanted to be near town and their daughter’s school. They began looking at homes to buy, but reached an impasse.

Haley desired a traditional Southern home while Jamie wanted a net-zero energy house. Net-zero energy homes, defined as homes that produce as much or more energy than they consume through the course of a year, generally are not designed and built with a traditional Southern style.

Heating and Cooling Kentucky Home

That’s when Jamie had an idea: find a grand Southern home that his wife loves and retrofit it with a geothermal system and other sustainable materials.

The Clarks were able to find such a home and a good solution to achieve both of their wants.

A ClimateMaster Trilogy® 45 heat pump system and a super-insulated iGate® Water Tank were installed in the home, which are big components in saving energy.

Heating, air conditioning and hot water currently comprise 73% of a home’s energy bill for the average American household. So if you can put a dent in those energy demands, it goes a long way toward greatly reducing monthly energy bills and energy usage.

Then add in the fact that the Clarks installed a Trilogy 45 system, which is currently the most energy efficient heating and cooling system available, and your chances at markedly lowering your energy usage get even better.

Other sustainable materials installed in the house were solar panels and ENERGY STAR® certified appliances.

So…Any Energy Savings?

But the entire reason to make these changes are to save a lot of energy and money on monthly utility bills. So, are Clarks saving energy? Is their home close to becoming a true net zero energy home?

From the article:

Early results are encouraging. The electric bill in December, when there were only six days with more than six hours of sunshine, was $153. But the bills were $11 in March, $30 in April and $9 in May.

Jamie said that a geothermal tax credit, which allows home owners to deduct 30% of the total geothermal system installed cost from their tax liability or tax due, would lower costs even more.